21mm (0.82in) Black on Yellow 3:1 Heat Shrink Tube
Ideally suited to mark cables, fiber cables, and wires, this 21mm (0.82in) black print on yellow shrink wrap label tubing is recommended for diameters ranging from 4.2mm to 13.5mm (0.16in to 0.53in). With a 3:1 shrink ratio, this tubing can shrink to a third of its size when heat is applied, enabling it to pass over connectors and still shrink down to a snug fit on the cable. Meets UL 224 standard and can withstand up to 600 volts and 257° F (125° C).
1.5m (4.9ft) of tube per cassette. 1 cassette per package. For use with P-touch 500 Series, 800 Series and 900 Series label printers.
Please note that the old HSe tapes (eg. HSe-651) which had a shrink ratio of 2:1, have been replaced by these new HSe tapes (eg. HSe-651E) which have a more useful 3:1 shrink ratio. Please see the table below when choosing the correct size from the new HSe tapes. Heat Shrink tubing is now also available in white or yellow.
HSe tube is a printable heat shrink tubing designed to mark cables, fiber and wires.
See compatibility below, not for use in every model.
This Heat Shrink Tube can ONLY be used in accordance with the chart below, check Brother label maker compatibility:
| Heat Shrink SKU | Compatible Printers |
|---|---|
|
HSe211e, HSe611e, HSe221e, HSe621e, HSe231e, HSe631e, LMHSe211, LMHSe611, LMHSe221, LMHSe621, LMHSe231, LMHSe631, LMHSe241, LMHSe641 |
PTD600, PTD610BT, PTE300, PTE310BTVP, PTE500, PTE510VP, PTE550, PTE560BT, PTE800W, PTD800W, PTP750W, PTP900W, PTP950NW |
| HSe251e, HSe651e, LMHSe251, LMHSe651 | PTD600, PTD610BT, PTE500, PTE510VP, PTE550, PTE560BT, PTE800W, PTD800W, PTP750W, PTP900W, PTP950NW |
| HSe261e, HSe661e | PTE800W, PTD800W, PTP900W, PTP950NW |
| ALSO KNOWN AS: | HS651, HSE651, HSE-651, HS-651, HSe651e, HSe-651e |
| TYPE: | HSe Heat Shrink |
| SIZE: | 0.82 in (21mm) |
| LENGTH: | 4.9 ft (1.5M) |
| COLOR: | Black On Yellow Shrink Tube |
| FOR USE: | Cables, Fiber & Wires |
| THERMAL HSE TUBES: | No Ink Or Toner Required! |
| UPC: | 012502670445 |
