The LM Tapes compatible Heat Shrink Tubing is used for marking cables, fiber and wires and replaces HSE211. It measures 0.23 in x 4.9 ft (5.8mm x 1.5m) and is Black on White.
Printable 2:1 Like the Brother HSE211 cassettes, you'll find these compatibles to be easy loading and durable.
Heat Shrink Tubes are easy to use, simple insert the tape and create the label as you normally would - after printing cut the excess ends of and insert wire through the tube. You will need a heat gun to finish the process, which will shrink the label to fit the source.
This LM-HSE211 Heat Shrink Tube can ONLY be used in the following Brother P-touch label printers to mark cables, fiber and wires:
| PTD600, PTE300, PTE500, PTE550W, PTE800W, PTP750W, PTP900W, PTP950NW |
| Brother HSe Heat Shrink Tubes – Individual heat shrink tubes: 1.5m (4.9ft) long. 2:1 shrink ratio / 300V / 125°C / VW-1 | ||||||
 |
Heat Shrink Tube Width: |
5.8mm (0.23in) |
8.8mm (0.34in) |
11.7mm (0.46in) |
17.7mm (0.69in) |
23.6mm (0.92in) |
| Recommended (Outside Diameter)r): |
1.7-3.2mm (0.07-0.13in) |
2.6-5.1mm (0.10-0.20in) |
3.6-7.0mm (0.14-0.28in) |
5.4-10.6mm (0.21-0.42in) |
7.3-14.3mm (0.28-0.56in) |
|
| Black on White | HSe211 | HSe221 | HSe231 | HSe241 | HSe251 | |
| Compatible Heat Shrink Tubes | ||||||
| Black on White | LM-HSE211 | LM-HSE221 | LM-HSE231 | LM-HSE241 | LM-HSE251 | |
| Black on Yellow | LM-HSE611 | LM-HSE621 | LM-HSE631 | LM-HSE641 | LM-HSE651 | |
LM Tape Compatible HSe-211 Black on White Heat Shrink Tube
| ALSO KNOWN AS: | LMHSE211, HS211, HSE211, HS-211, HSE-211 |
| TYPE: | HSe Heat Shrink |
| SIZE: | 0.23 in (5.8mm) |
| LENGTH: | 4.9 ft (1.5m) |
| COLOR: | Black On White Shrink Tube |
| FOR USE: | Cables, Fiber & Wires |
| THERMAL HSE TUBES: | No Ink Or Toner Required! |
| UPC: | 689274617277 |
