This is a new but opened box - product has not been used and is in perfect working condition...a good opportunity to save. Limited Quantity.
Brother HSE251: Printable 2:1 Heat Shrink Tubing for Marking Cables, Fiber and Wires. 0.92 in x 4.9 ft (23.6mm x 1.5m) Black on White.
HSe tube is a printable heat shrink tubing designed to mark cables, fiber and wires.
See compatibility below, not for use in every model.
This Heat Shrink Tube can ONLY be used in the following Brother P-touch label makers to mark cables, fiber and wires:
PTD600, PTE300, PTE500, PTE550W, PTE800W, PTP750W, PTP900W, PTP950NW |
Brother HSe Heat Shrink Tubes – Individual heat shrink tubes: 1.5m (4.9ft) long. 2:1 shrink ratio / 300V / 125°C / VW-1 | ||||||
Heat Shrink Tube Width: |
5.8mm (0.23in) |
8.8mm (0.34in) |
11.7mm (0.46in) |
17.7mm (0.69in) |
23.6mm (0.92in) |
|
Recommended (Outside Diameter)r): |
1.7-3.2mm (0.07-0.13in) |
2.6-5.1mm (0.10-0.20in) |
3.6-7.0mm (0.14-0.28in) |
5.4-10.6mm (0.21-0.42in) |
7.3-14.3mm (0.28-0.56in) |
|
Black on White | HSe211 | HSe221 | HSe231 | HSe241 | HSe251 | |
Compatible Heat Shrink Tubes | ||||||
Black on White | LM-HSE211 | LM-HSE221 | LM-HSE231 | LM-HSE241 | LM-HSE251 | |
Black on Yellow | LM-HSE611 | LM-HSE621 | LM-HSE631 | LM-HSE641 | LM-HSE651 |
ALSO KNOWN AS: | HS251, HSE251, HSE-251, HS-251 |
TYPE: | HSe Heat Shrink |
SIZE: | 0.92 in (23.6mm) |
LENGTH: | 4.9 ft (1.5M) |
COLOR: | Black On White Shrink Tube |
FOR USE: | Cables, Fiber & Wires |
THERMAL HSE TUBES: | No Ink Or Toner Required! |
UPC: | 012502635260 |